NATE table is a modern butcher block style table made of solid walnut, cherry and maple and custom welded steel hairpin legs.
The table is 78" long by 45" wide by 2" thick by 31" tall. Two inch thick pieces of walnut, cherry and maple are jointed by biscuits to create a solid 2" thick table top. The table is CNC planed to guarantee it is perfectly level and square. After CNCing the table top is scraped and sanded by hand to a perfectly smooth surface on both sides. The top and bottom edges are beveled to a 45° angle. The wood is then finished with dewaxed shellac and a super strong satin waterborne polyurethane. This finish is beautiful, easy to clean and stain resistant.
The steel legs are made from custom welded 1/2" solid round rod attached to 1/4" steel plate which is laid into CNC-cut pockets in the underside of the table. It is ground to a shine and finished with three coats of sealing varnish. The legs feature leveling feet to insure it will never rock or tip.
The table is finished with a CNC engraving which includes the artist's name, the date of fabrication and a serial number.